When it comes to interior designing, white walls have been the focus of attention for many years. It makes a room appear brighter and bigger. But, people appear to be fascinated to interior walls that are accented. The reason for this is that they make a room more stunning and appealing than before. Well, if you want to add a twist to your interior walls, then stone veneer installation can be an ideal choice for you. 

Any person can think of placing wallpaper or painting on an accented interior wall. But, a stone veneer Red Deer appears extremely captivating and unique if you want to do something creative and different.  

Today, we are going to share with you a couple of tips on installing stone veneer for your accent walls.  

Pick the Type of Stone You Like 

It’s vital to choose the correct stone. However, since there are a lot of options available on the market, you might be overwhelmed by this process. Well, you should not worry because most stone veneer stores offer the best types of stone options for the accented stone veneer installation. You might have to choose between a modern stone veneer or a classic stone veneer. The answer to this greatly depends on your preferences.  

A couple of individuals choose to combine both options as well. However, it takes time to achieve the right pairing.  

Measure the Wall 

The main factor of installing stone veneer is to take precise measurements. You can end up with a huge gap on your wall if you skip even only 1-inch. The pattern gets disrupted completely in the worst-case scenario. 

Cover the Room with White Cloth or Plastic 

Of course, you do not want trimmed stones dirtying your sofa cloth or sheets or cement dried up on the floor. Thus, before the entire process, you have to keep in mind that you’ve got to cover the room with plastic or any tough cloth.  

Cut the Cement Board and Apply It onto the Wall 

To level up the wall surface, you have to use cement board. Aside from that, the cement sticks easily to the board and takes time to dry up. Because of this, you can take your time installing the stones and you will not have to apply a layer of cement every stone. This will offer you the best outcome and saves you a lot of time.  

Fill the Gaps 

You can begin getting rid of the access cement after you are done installing the stones onto the wall. Then, fill up any gaps you see. It will offer the wall a finished look. 

Seal the Pores by Applying Solution 

Before the wall dries up completely, it is vital to apply a solution. The pores will be filled by the solution and it will stop water from being absorbed.  

It’s indeed a simple process to install accented wall stone veneers. However, it requires a lot of attention. If you don’t have the time to install stone veneers on your own, you can always hire a professional.